Bypass T2 Mac ibridge10.1- Untethered

Bypass T2 Mac ibridge10.2 and up- Tethered

iBridge 10.x ( supported only ) 

Main features:

• Untethered Bypass - No need to repeat the process when the battery runs out or after a reboot
• Supports OTA updates
• Cannot be erased or wiped with Configurator (if done, a free re-bypass is required)

Instructions to perform the bypass:

1. Restore the T2 machine to the latest bridgeOS
2. Power on until you see the "World" screen
3. Do not set up Wi-Fi - open the iAldazT2Activator app immediately
4. Put the device into DFU mode
5. Once the bypass is complete, power on the T2 machine
6. You will see the "Folder" screen - this indicates the device is activated

macOS installation:

1. Shut down the Mac
2. Turn it on while holding Left Command + R + Power
3. Launch the macOS installation assistant
4. Enjoy your T2 Mac with bypass!
   

   Download macOS Tahoe 26.1

   ✅ Compatible with bridgeOS 10.1 only

   Get it here: 

    https://swcdn.apple.com/content/downloads/60/34/089-04325-A_JAKF079NR4/fjimp3su7pvbg0o6sf3kus7k989finz274/InstallAssistant.pkg
   
   

Download Pass 1234
https://www.mediafire.com/folder/y8wswxu9k4q80/AldazTool

Note: If you erase or wipe with Configurator, you will need to perform the bypass again (free).

NO REFUNDS AFTER PROCESSED