LPro AIO v5 or up
Guide (AUTO METHOD ONLY) :
Step 1: Connect Device in "RECOVERY MODE"
Step 2: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)
Step 3: Click "Purple Mode" Button

This Step NO NEED DCSD for iPhone 7-X (A10/A11)
DCSD for iPads and iPhone 6s, 6s Plus Needed
After Successful Write, Device Automatically Enters Recovery Mode

Step 4: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)
Step 5: Click "Run PwnDFU" Button
Step 6: Click "Boot Device" Button
Step 7: Click "Check SSH"
(Wait for the Button to light up to become this Check SSH ✔️)
Step 8: Click "HELLO BYPASS"

Wait for the Device to turn on and the Device is Successfully Activated
—————————————————————
ECID REGISTRATION

Guide (MANUAL METHOD ONLY) :
Step 1: Connect Device in "NORMAL MODE"
It Will Show Serial To Change Manually
Step 2: Connect Device in "RECOVERY MODE"
Step 3: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)
Step 4: Click "Purple Mode" Button

You Can Connect DCSD Now and Click OK or Click Close.
Click Close and Connect DCSD Cable for Manual Methods

Step 5: Open MagicCFG or Any Tool to Edit Serial You Copied in Step 1

PLEASE VERIFY IF SERIAL CHANGED SUCCESSFULLY and Proceed Next Step Carefully. Read Device info in Normal Mode to verify Serial Change.

Step 6: Click "Hello Bypass" Button in Normal MODE FIRST (DO NOT SKIP)
This Checks if Device Data is OK For Bypass. Proceed Next Step After Success Message.

Step 7: Connect Device in "RECOVERY MODE"
Step 8: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)
Step 9: Click "Run PwnDFU" Button
Step 10: Click "Boot Device" Button
Step 11: Click "Check SSH"
(Wait for the Button to light up to become this Check SSH ✔️)
Step 12: Click "HELLO BYPASS"

https://mega.nz/folder/E1AXhKTL#sulaWt1HyVs2bA8EGcNE9g